- Pull out the crown to position C to stop the second hand at 0 (12 o'clock).
- Turn the hour/minute hands in a clockwise direction to set a day. In order to set the day, you must advance the hour hand by 24 hours per day.
- Push the crown back to the normal position.

(NOTE) If the day is set by turning the crown counterclockwise, there is the possibility the
date will not change over.
Do not set the day by turning the crown in counterclockwise direction.
* The day changes somewhere between 0:00a.m. and 5:30a.m. or a little later.

After setting the day, set the hour and minute hands.
- Pull out the crown to position C.
- Turn the hour/minute hands in a clockwise direction to set the time.
- Push the crown back to the normal position.

(NOTE) Make sure you have correctly set AM/PM before setting the time.
When the day changes over, it is a.m..
(Day changes over between 0:00a.m. and 5:30a.m. or little later)

- Pull out the crown to position B.
- Wind the crown clockwise to rotate the moonphase.
-The age of the moon is indicated in units of days. The average period from a new moon to the next new moon is equivalent to about 29.5 days.

- Reading the age of the moon, set the moonphase to the age (0,7,15 or 22) closest to the listed.

(NOTE) More accurate setting can be made at the same time of a new moon (the start of a month) or at full moon (day 15 of a month).

- Pull the crown out to position B. Turn the crown counter-clockwise to set the date.

(NOTE) Do not set the date between the hours 9:00p.m. and 0:30a.m..The date may not change
correctly the next day.